Navigation lets you attach data to a navigation operation by defining arguments for a destination. For example, a user profile destination might take a user ID argument to determine which user to display.

In general, you should strongly prefer passing only the minimal amount of data between destinations. For example, you should pass a key to retrieve an object rather than passing the object itself, as the total space for all saved states is limited on Android. If you need to pass large amounts of data, use a[`ViewModel`](https://developer.android.com/reference/androidx/lifecycle/ViewModel)as described in[ViewModel overview](https://developer.android.com/topic/libraries/architecture/viewmodel#sharing).

## Define destination arguments

To pass data between destinations, first define the argument by adding it to the destination that receives it by following these steps:

1. In the[Navigation Editor](https://developer.android.com/guide/navigation/design/editor), click the destination that receives the argument.
2. In the**Attributes** panel, click**Add** (**+**).
3. In the**Add Argument Link**window that appears, enter the argument name, argument type, whether the argument is nullable, and a default value, if needed.
4. Click**Add** . Notice that the argument now appears in the**Arguments** list in the**Attributes**panel.
5. Next, click the corresponding action that takes you to this destination. In the**Attributes** panel, you should now see your newly added argument in the**Argument Default Values**section.
6. You can also see that the argument was added in XML. Click the**Text**tab to toggle to XML view, and notice that your argument was added to the destination that receives the argument. An example is shown in the following:

        <fragment android:id="@+id/myFragment" >
            <argument
                android:name="myArg"
                app:argType="integer"
                android:defaultValue="0" />
        </fragment>

### Supported argument types

The Navigation library supports the following argument types:

|        Type         |                                      app:argType syntax                                       |                                          Support for default values                                           | Handled by routes | Nullable |
|---------------------|-----------------------------------------------------------------------------------------------|---------------------------------------------------------------------------------------------------------------|-------------------|----------|
| Integer             | app:argType="integer"                                                                         | Yes                                                                                                           | Yes               | No       |
| Float               | app:argType="float"                                                                           | Yes                                                                                                           | Yes               | No       |
| Long                | app:argType="long"                                                                            | Yes - Default values must always end with an 'L' suffix (e.g. "123L").                                        | Yes               | No       |
| Boolean             | app:argType="boolean"                                                                         | Yes - "true" or "false"                                                                                       | Yes               | No       |
| String              | app:argType="string"                                                                          | Yes                                                                                                           | Yes               | Yes      |
| Resource Reference  | app:argType="reference"                                                                       | Yes - Default values must be in the form of "@resourceType/resourceName" (e.g. "@style/myCustomStyle") or "0" | Yes               | No       |
| Custom Parcelable   | app:argType="\<type\>", where \<type\> is the fully-qualified class name of the`Parcelable`   | Supports a default value of "@null". Does not support other default values.                                   | No                | Yes      |
| Custom Serializable | app:argType="\<type\>", where \<type\> is the fully-qualified class name of the`Serializable` | Supports a default value of "@null". Does not support other default values.                                   | No                | Yes      |
| Custom Enum         | app:argType="\<type\>", where \<type\> is the fully-qualified name of the enum                | Yes - Default values must match the unqualified name (e.g. "SUCCESS" to match MyEnum.SUCCESS).                | No                | No       |

| **Note:** References to resources are supported*only*in reference types. Using a resource reference in any other type results in an exception.

If an argument type supports null values, you can declare a default value of null by using`android:defaultValue="@null"`.

Routes, deep links, and URIs with their arguments can be parsed from strings. This is not possible using custom data types such as Parcelables and Serializables as seen in the preceding table. To pass around custom complex data, store the data elsewhere such as a ViewModel or database and only pass an identifier while navigating; then retrieve the data in the new location after navigation has concluded.

When you choose one of the custom types, the**Select Class** dialog appears and prompts you to choose the corresponding class for that type. The**Project**tab lets you choose a class from your current project.

You can choose**\<inferred type\>**to have the Navigation library determine the type based on the provided value.

You can check**Array** to indicate that the argument should be an array of the selected**Type**value. Note the following:

- Arrays of enums and arrays of resource references are not supported.
- Arrays support nullable values, regardless of the support for nullable values of the underlying type. For example, using`app:argType="integer[]"`lets you use`app:nullable="true"`to indicate that passing a null array is acceptable.
- Arrays support a single default value, "@null". Arrays don't support any other default value.

| **Caution:** Passing complex data structures over arguments is considered an poor practice. Each destination should be responsible for loading UI data based on the minimum necessary information, such as item IDs. This simplifies process recreation and avoids potential data inconsistencies.

### Override a destination argument in an action

Destination-level arguments and default values are used by all actions that navigate to the destination. If needed, you can override the default value of an argument (or set one if it doesn't already exist) by defining an argument at the action level. This argument must be of the same name and type as the argument declared in the destination.

The following XML declares an action with an argument that overrides the destination-level argument from the preceding example:  

    <action android:id="@+id/startMyFragment"
        app:destination="@+id/myFragment">
        <argument
            android:name="myArg"
            app:argType="integer"
            android:defaultValue="1" />
    </action>

## Use Safe Args to pass data with type safety

The Navigation component has a Gradle plugin called Safe Args that generates simple object and builder classes for type-safe navigation and access to any associated arguments. Safe Args is strongly recommended for navigating and passing data, because it ensures type safety.

If you are not using Gradle, you can't use the Safe Args plugin. In these cases, you can[use Bundles](https://developer.android.com/guide/navigation/use-graph/pass-data#bundle)to directly pass data.

To add[Safe Args](https://developer.android.com/topic/libraries/architecture/navigation/navigation-pass-data#Safe-args)to your project, include the following`classpath`in your top level`build.gradle`file:  

### Groovy

```groovy
buildscript {
    repositories {
        google()
    }
    dependencies {
        def nav_version = "2.9.6"
        classpath "androidx.navigation:navigation-safe-args-gradle-plugin:$nav_version"
    }
}
```

### Kotlin

```kotlin
buildscript {
    repositories {
        google()
    }
    dependencies {
        val nav_version = "2.9.6"
        classpath("androidx.navigation:navigation-safe-args-gradle-plugin:$nav_version")
    }
}
```

You must also apply one of two available plugins.

To generate Java language code suitable for Java or mixed Java and Kotlin modules, add this line to**your app or module's** `build.gradle`file:  

### Groovy

```groovy
plugins {
  id 'androidx.navigation.safeargs'
}
```

### Kotlin

```kotlin
plugins {
    id("androidx.navigation.safeargs")
}
```

Alternatively, to generate Kotlin code suitable for Kotlin-only modules add:  

### Groovy

```groovy
plugins {
  id 'androidx.navigation.safeargs.kotlin'
}
```

### Kotlin

```kotlin
plugins {
    id("androidx.navigation.safeargs.kotlin")
}
```

You must have`android.useAndroidX=true`in your[`gradle.properties`file](https://developer.android.com/studio/build#properties-files)as per[Migrating to AndroidX](https://developer.android.com/jetpack/androidx/migrate#migrate)).

After you've enabled Safe Args, your generated code contains the following type safe classes and methods for each action as well as with each sending and receiving destination.

- A class is created for each destination where an action originates. The name of this class is the name of the originating destination appended with the word "Directions". For example, if the originating destination is a fragment that is named`SpecifyAmountFragment`, the generated class is called`SpecifyAmountFragmentDirections`.

  This class has a method for each action defined in the originating destination.
- For each action used to pass the argument, an inner class is created whose name is based on the action. For example, if the action is called`confirmationAction,`the class is named`ConfirmationAction`. If your action contains arguments without a`defaultValue`, then you use the associated action class to set the value of the arguments.

- A class is created for the receiving destination. The name of this class is the name of the destination appended with the word "Args". For example, if the destination fragment is named`ConfirmationFragment,`the generated class is called`ConfirmationFragmentArgs`. Use this class's`fromBundle()`method to retrieve the arguments.

The following example shows you how to use these methods to set an argument and pass it to the[`navigate()`](https://developer.android.com/reference/androidx/navigation/NavController#navigate(kotlin.Int))method:  

### Kotlin

```kotlin
override fun onClick(v: View) {
   val amountTv: EditText = view!!.findViewById(R.id.editTextAmount)
   val amount = amountTv.text.toString().toInt()
   val action = SpecifyAmountFragmentDirections.confirmationAction(amount)
   v.findNavController().navigate(action)
}
```

### Java

```java
@Override
public void onClick(View view) {
   EditText amountTv = (EditText) getView().findViewById(R.id.editTextAmount);
   int amount = Integer.parseInt(amountTv.getText().toString());
   ConfirmationAction action =
           SpecifyAmountFragmentDirections.confirmationAction();
   action.setAmount(amount);
   Navigation.findNavController(view).navigate(action);
}
```

In the code for the receiving destination, use the[`getArguments()`](https://developer.android.com/reference/androidx/fragment/app/Fragment#getArguments())method to retrieve the bundle and use its contents. When using the`-ktx`dependencies, Kotlin users can also use the`by navArgs()`property delegate to access arguments.  

### Kotlin

```kotlin
val args: ConfirmationFragmentArgs by navArgs()

override fun onViewCreated(view: View, savedInstanceState: Bundle?) {
    val tv: TextView = view.findViewById(R.id.textViewAmount)
    val amount = args.amount
    tv.text = amount.toString()
}
```

### Java

```java
@Override
public void onViewCreated(View view, @Nullable Bundle savedInstanceState) {
    TextView tv = view.findViewById(R.id.textViewAmount);
    int amount = ConfirmationFragmentArgs.fromBundle(getArguments()).getAmount();
    tv.setText(amount + "");
}
```

### Use Safe Args with a global action

When using Safe Args with a[global action](https://developer.android.com/topic/libraries/architecture/navigation/navigation-global-action), you must provide an`android:id`value for your root`<navigation>`element, as shown in the following example:  

```xml
<?xml version="1.0" encoding="utf-8"?>
<navigation xmlns:app="http://schemas.android.com/apk/res-auto"
            xmlns:tools="http://schemas.android.com/tools"
            xmlns:android="http://schemas.android.com/apk/res/android"
            android:id="@+id/main_nav"
            app:startDestination="@id/mainFragment">

    ...

</navigation>
```

Navigation generates a`Directions`class for the`<navigation>`element that is based on the`android:id`value. For example, if you have a`<navigation>`element with`android:id=@+id/main_nav`, the generated class is called`MainNavDirections`. All destinations within the`<navigation>`element have generated methods for accessing all associated global actions using the same methods as described in the previous section.

## Pass data between destinations with Bundle objects

If you aren't using Gradle, you can still pass arguments between destinations by using`Bundle`objects. Create a`Bundle`object and pass it to the destination using[`navigate()`](https://developer.android.com/reference/androidx/navigation/NavController#navigate(kotlin.Int)), as in the following example:  

### Kotlin

```kotlin
val bundle = bundleOf("amount" to amount)
view.findNavController().navigate(R.id.confirmationAction, bundle)
```

### Java

```java
Bundle bundle = new Bundle();
bundle.putString("amount", amount);
Navigation.findNavController(view).navigate(R.id.confirmationAction, bundle);
```

In your receiving destination's code, use the[`getArguments()`](https://developer.android.com/reference/androidx/fragment/app/Fragment#getArguments())method to retrieve the`Bundle`and use its contents:  

### Kotlin

```kotlin
val tv = view.findViewById<TextView>(R.id.textViewAmount)
tv.text = arguments?.getString("amount")
```

### Java

```java
TextView tv = view.findViewById(R.id.textViewAmount);
tv.setText(getArguments().getString("amount"));
```

## Pass data to the start destination

You can pass data to your app's start destination. First, you must explicitly construct a[`Bundle`](https://developer.android.com/reference/android/os/Bundle)that holds the data. Next, use one of the following approaches to pass the`Bundle`to the start destination:

- If you're creating your`NavHost`programmatically, call[`NavHostFragment.create(R.navigation.graph, args)`](https://developer.android.com/reference/androidx/navigation/fragment/NavHostFragment#create(kotlin.Int,android.os.Bundle)), where`args`is the`Bundle`that holds your data.
- Otherwise, you can set start destination arguments by calling one of the following overloads of`NavController.setGraph()`:
  - Use the ID of the graph:[`navController.setGraph(R.navigation.graph,
    args)`](https://developer.android.com/reference/androidx/navigation/NavController#setGraph(androidx.navigation.NavGraph))
  - Use the graph itself:[`navController.setGraph(navGraph, args)`](https://developer.android.com/reference/androidx/navigation/NavController#setGraph(androidx.navigation.NavGraph))

To retrieve the data in your start destination, call[`Fragment.getArguments()`](https://developer.android.com/reference/androidx/fragment/app/Fragment#getArguments()).
| **Note:** when manually calling`setGraph()`with arguments, you must**not** use the`app:navGraph`attribute when creating the`NavHostFragment`in XML as that internally calls`setGraph()`without any arguments, resulting in your graph and start destination being created twice.

## ProGuard considerations

If you are[shrinking your code](https://developer.android.com/studio/build/shrink-code), you need to prevent your`Parcelable`,`Serializable`, and`Enum`class names from being obfuscated as part of the minification process. You can do this in one of two ways:

- Use @Keep annotations.
- Use keepnames rules.

The following subsections outline these approaches.

### Use @Keep annotations

The following example adds[`@Keep`](https://developer.android.com/reference/kotlin/androidx/annotation/Keep)annotations to model class definitions:  

### Kotlin

```kotlin
@Keep class ParcelableArg : Parcelable { ... }

@Keep class SerializableArg : Serializable { ... }

@Keep enum class EnumArg { ... }
```

### Java

```java
@Keep public class ParcelableArg implements Parcelable { ... }

@Keep public class SerializableArg implements Serializable { ... }

@Keep public enum EnumArg { ... }
```

### Use keepnames rules

You can also add`keepnames`rules to your`proguard-rules.pro`file, as shown in the following example:

*proguard-rules.pro*  

    ...

    -keepnames class com.path.to.your.ParcelableArg
    -keepnames class com.path.to.your.SerializableArg
    -keepnames class com.path.to.your.EnumArg

    ...

## Additional resources

To learn more about navigation, consult the following additional resources.

### Codelabs

- [Learn Jetpack Navigation](https://codelabs.developers.google.com/codelabs/android-navigation/)

### Videos

- [Android Jetpack: Manage UI navigation with navigation controller (Google I/O '18)](https://www.youtube.com/watch?v=8GCXtCjtg40%22)